White Oak wood veneer 48" x 120" with deals wood backer A grade 4' x 10' x 1/25" thick

$129.17
#SN.337520
White Oak wood veneer 48" x 120" with deals wood backer A grade 4' x 10' x 1/25" thick, White Oak Flat Cut grain 48" x 120" on wood backer A grade.
Black/White
  • Eclipse/Grove
  • Chalk/Grove
  • Black/White
  • Magnet Fossil
12
  • 8
  • 8.5
  • 9
  • 9.5
  • 10
  • 10.5
  • 11
  • 11.5
  • 12
  • 12.5
  • 13
Add to cart
Product code: White Oak wood veneer 48" x 120" with deals wood backer A grade 4' x 10' x 1/25" thick

White Oak Flat Cut grain 48" x 120" on wood backer A grade quality. 4 x 10 x 1/25". Photos are representative of actual stock which will vary in color and grain since this is a natural product. Flat Cut means wide or open grain pattern vs Quarter Cut which is tight straight grain and had flake in it. Wood backer is sometimes preferred over paper because it is thicker and may cover minor imperfections better. Also may bond better, but both products work well. Some photos shown wet with water to show finish color. Grain runs longer direction. Ships rolled in long narrow box with application instructions. Some photos may show other sizes, customer projects, helpful accessory products (sold separately), and wet or finished veneer. Product is unfinished. Other sizes, backers, raw veneer and edgebanding are available. Faster shipping may be available.

Trust the experience, knowledge, and reputation that have served the wood industry and novices since 1995.

About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.

Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best deals way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

Thickness: Paper-backed veneers are generally 1/40 and wood-backed veneers are 1/25. Raw plain veneer with no backing is about 1/32-1/42.

How to cut: generally cut with a razor knife or similar tools and some type of straight edge.

How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.

How to finish: most any conventional finishing products can be used with veneer that is applied correctly.

Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldnt impact overall quality or satisfaction. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.



Exported By ExportYourStore :)
SKU:mx1_121844998743*

.
295 review

4.23 stars based on 295 reviews