Voron 0.1 V0.1 ASA ALL deals Printed Parts kit - USA made and shipped - Choose Threaded Inserts!

This is the full 3D printed Kit with all of the parts that need to be printed for the Voron 0.1. Please look at full part list below.

These are printed in ASA which exceeds ABS+ properties!

These exceed the recommended settings by the Voron team! 0.2mm layer height.
5 Perimeters, 50% Grid Infill, 5 Top Layers, 5 Bottom Layers.

This kit includes every printed part for the Voron 0.1!

If you need a custom color or custom part send me a message I deals can do many colors and I do all high temp materials.

Below is the list of every part included:

--FUNCTIONAL PARTS--

Tools Heads - Mini Afterburner:
[a]_Cowling_dragon_x1
[a]_Cowling_BMO_x1(optional)
[a]_Cowling_Mosquito_x1(optional)
[a]_Mid_Body_x1
Guidler_DD_x1
Latch_DD_x1
Latch_Shuttle_DD_x1
Motor_Frame_x1
Strain_Relief_Body_x1
Strain_Relief_Spacers_x2

Functional Assembly Parts:
[a]_9mm_Spacer_x6
[a]_A_Drive_Tensioner_x1
[a]_B_Drive_Tensione_x1
[a]_Cable_Tie_x1
[a]_Foot_Front_x2
[a]_Foot_Rear_Left_x1
[a]_Foot_Rear_Right_x1
[a]_Railstops_x6
[a]_Tensioner_Knob_x2
[a]_Thumb_Nut_x3
[a]_X_Endstop_Bumper_x1
[a]_Z_Endstop_Mount_x1
[a]_Z_Motor_Mount_x1
A_Drive_Frame_Lower_x1
A_Drive_Frame_Upper_x1
A_Idler_Lower_x1
A_Idler_Upper_x1
B_Drive_Frame_Lower_x1
B_Drive_Frame_Upper_x1
B_Idler_Lower_x1
B_Idler_Upper_x1
Front_Bed_Mount_x1
M2_Nut_Adapter_Rotated_x5
MGN7_Rail_Guide_x2
Power_Inlet_x1
PSU_Cover_x1
Raspberry_Pi_3b_Mount_x1
Rear_Bed_Mount_Left_x1
Rear_Bed_Mount_Right_x1
Skr_E3_Mounting_Bracket_x1
Spool_Holder_V0_x1
T8_Nut_Block_16mmx22mmOD_x1
X_Carriage_90_x1
XY_Joint_Left_Lower_x1
XY_Joint_Left_Upper_x1
XY_Joint_Right_Lower_x1
XY_Joint_Right_Upper_x1

--ASTHETIC PARTS--
Panel_Mounting:
Door_Handle_x1.stl
Door_Latch_x2.stl

Panel_Mounting > For_2.5mm_Panels:

2point5mm_Bottom_Corner_Front_x1.STL
2point5mm_Bottom_Corner_Rear_mirror_x1.stl
2point5mm_Bottom_Corner_Rear_x1.STL
2point5mm_Bottom_Corner_Side_mirror_x1.stl
2point5mm_Bottom_Corner_Side_x2.STL
2point5mm_Hinge_Bottom_A_x1.STL
2point5mm_Hinge_Bottom_B_x1.STL
2point5mm_Hinge_Top_A_x1.STL
2point5mm_Hinge_Top_B_x1.STL
2point5mm_Middle_Clip_x9.STL
2point5mm_Top_Corner_Front_x1.STL
2point5mm_Top_Corner_Rear_mirror_x1.stl
2point5mm_Top_Corner_Rear_x1.stl
2point5mm_Top_Corner_Side_mirror_x1.stl
2point5mm_Top_Corner_Side_x2.STL

Tools:
BMG_Shaft_Mod_Spacer_x1.STL
AB_pulley_jig_x1.stl

Tophat:
Front_and_Rear_Midclip_x2.STL
Left_and_Right_Midclip_x2.STL
Lower_Corner_1_and_3_Clip_x2.stl
Lower_Corner_2_and_4_Clip_x2.STL
Tophat_Part1_x1.STL
Tophat_Part2_x2.STL
Tophat_Part3_x1.STL
Unibody_Tophat_x1.STL
Upper_Corner_1_and_3_Clip_x2.STL
Upper_Corner_2_and_4_Clip_x2.STL

Skirts:
Skirt_mirror_x3.STL
Skirt_x3.STL


Thanks for Voron Team's great work once again!! All parts released by the voron team under the GNU General Public License v3.0.